Skip to content

boards /rodeo-pot-1

Render of the Rev-B rodeo-pot-1 at an angle: a small square black board with one potentiometer standing on a threaded bushing, its flatted shaft upright.
Rev-B— three-quarter view · CAD render

Satellite

rodeo-pot-1

Designed

The pot bank cut down to one. Same pot, same microcontroller, same connectors, same firmware — so a lone knob and a bank of four read identically to the Seed and sit at the same height on a panel. It hangs from the pot’s own bushing with one M2 standoff beside it, which is there to stop the board swinging round when the nut is tightened or someone forces the knob past its stop.

controls
1 × 9 mm pot, panel mount
outline
25 × 25 mm
brain
CH32V003F4P6
chain slot
board kind 1, one pot slot
firmware
kind 1 runs on the one satellite image
Designed

Drawn and routed, with fab outputs generated — and not ordered. The first Rev B run went to JLC on 2026-10-18 and covered thirteen boards; this is not one of them.

More views

Top and bottom, from the KiCad files

  • Render of the top of the Rev-B rodeo-pot-1: a single potentiometer in the middle of a 25 mm square black board, marked RV1, with a mounting hole and a row of programming pads beside it.
    Rev-B— top · CAD render
  • Render of the underside of the Rev-B rodeo-pot-1: the CH32V003 microcontroller, the status LED, the chain input and output connectors labelled CHAIN IN and CHAIN OUT, and the words RODEO POTENTIOMETER, Kind 1, Rev B1 in white silkscreen.
    Rev-B— bottom · CAD render

Files

Published with the board

Nothing here sits behind a sign-up. Fork a satellite, respin it, and the host still reads it.

  • .kicad_pro KiCad project Schematic, layout, footprints. link pending the public repo
  • .zip Gerbers Fab-ready, plus drill maps. link pending the public repo
  • .csv BOM + CPL Parts and placements. link pending the public repo
  • src Firmware Where the board has its own. link pending the public repo

The rest of the family

Want in?

Rodeo goes to Kickstarter in January 2027. The waitlist hears first, and day-one backers are planned to get an early-bird price. One email to confirm, then nothing until there is news.

You will get one email asking you to confirm. Nothing else until there is something to say, and unsubscribe from any of it.