boards /rodeo-audio-3.5mm
Daughterboard
rodeo-audio-3.5mm
VerifiedEight audio signals leave the motherboard on one ribbon and land here, on a board that bolts to the rear rail. It is passive apart from protection: a series resistor and a clamp on every input, an ESD diode on every jack contact. A quarter-inch variant will share the circuit with different jacks.
- jacks
- 4 × stereo 3.5 mm TRS
- carries
- the 8 audio signals on the 2×10 ribbon
- protection
- series R and clamp per input, ESD per contact
All eight channels passed through it on 2026-10-31 — a different tone out of each output, each input naming whose tone it heard.
More views
Top and bottom, from the KiCad files
-
Rev-B— top · CAD render -
Rev-B— bottom · CAD render
Files
Published with the board
Nothing here sits behind a sign-up. Fork a satellite, respin it, and the host still reads it.
- .kicad_pro KiCad project Schematic, layout, footprints. link pending the public repo
- .zip Gerbers Fab-ready, plus drill maps. link pending the public repo
- .csv BOM + CPL Parts and placements. link pending the public repo
- src Firmware Where the board has its own. link pending the public repo
The rest of the family
Want in?
Rodeo goes to Kickstarter in January 2027. The waitlist hears first, and day-one backers are planned to get an early-bird price. One email to confirm, then nothing until there is news.